Anti-fouling Spray TITAN YATE
- For outboard motors, propellers, flaps, rudders, etc.
Delivery at your place
Order phone number 210 008 5999
ANTIFOULING tin-free paint. It avoids marine growth on the surfaces of outboard motors, propellers, flaps, rudders, etc. This special formula, based on HOSTAFLON ®, improves the performance of the engine by reducing water-friction.
DRYING:25 - 30 minutes
APPLICATION METHODS: Spray
PRESENTATION:400 ml.
Finish:Matt
Strongly shake the spray can before use. The surface has to be sanded, clean, dry and salt-free (wash it). Do not paint if the surface is under direct sunlight or if it has dew on it. For patching up bare metal surfaces in quick-drying painting operations, it is possible to apply 2 coats of TITAN YATE Spray Marine Primer before applying the Outdrive Antifouling.
BARE SURFACES:
Degrease, lightly sand and dust-off. Spray two full coats of Outdrive Antifouling, at a spraying distance of approximately 15 - 25 cm.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
If they are free from fouling, lightly sand and dust off. Spray two full coats of Outdrive Antifouling, at a spraying distance of approximately 15 - 25 cm.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
If they have bare metal areas or with rests of primers and/or previous antifouling coats, thoroughly remove them until reaching a clean, sound metal surface. Apply 2 coats of TITAN YATE Epoxy Primer and proceed as for previously coated outdrive elements in good condition.
-
DESCRIPTION
ANTIFOULING tin-free paint. It avoids marine growth on the surfaces of outboard motors, propellers, flaps, rudders, etc. This special formula, based on HOSTAFLON ®, improves the performance of the engine by reducing water-friction.
-
TECHNICAL INFO
DRYING:25 - 30 minutes
APPLICATION METHODS: Spray
PRESENTATION:400 ml.
Finish:Matt -
NSTRUCTIONS FOR USE
Strongly shake the spray can before use. The surface has to be sanded, clean, dry and salt-free (wash it). Do not paint if the surface is under direct sunlight or if it has dew on it. For patching up bare metal surfaces in quick-drying painting operations, it is possible to apply 2 coats of TITAN YATE Spray Marine Primer before applying the Outdrive Antifouling.
BARE SURFACES:
Degrease, lightly sand and dust-off. Spray two full coats of Outdrive Antifouling, at a spraying distance of approximately 15 - 25 cm.MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
If they are free from fouling, lightly sand and dust off. Spray two full coats of Outdrive Antifouling, at a spraying distance of approximately 15 - 25 cm.MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
If they have bare metal areas or with rests of primers and/or previous antifouling coats, thoroughly remove them until reaching a clean, sound metal surface. Apply 2 coats of TITAN YATE Epoxy Primer and proceed as for previously coated outdrive elements in good condition. - HOW TO'S
- COLOR LIST